TRACK CAR PINS
A pure turning job for a client working on track car BMW’S. Accuracy of ±0,02mm to be kept over two diameters
R&D Difuser
A small Aluminium part with 2mm holes drilled into the face for gas diffusion. We made a few variants for the customer to experiment with.
2″ CAPSTAN SHAFT
This customer asked us to design and manufacture a shaft and bushes to convert a worm drive gearbox into a capstan for a fishing trawler. The photos show the mill set for key seat milling in the main shaft.
Centre LATHE
The Denford Viceroy is a very flexible machine which when paired with a skilled craftsman. This machine suits many turning jobs. Shafts up to 25″ long and diameters to 10″.
Vertical MILLING MACHINE
The Warco Super Major is equipped with a wide range of tooling such as rotary tables and boring heads. the work envelope is 700mm X 220mm X 390mm. Parts may exceed this depending on the task required. Typical accuracy achieved is ±0.025mm or ±0.001″.
5″ BRASS BUSHING
An urgent job for a customer. We pushed through the night to get this done in order to get their kit back in operation.
Precision Mount
The customer specified a tight tolerance of ±0,001″ in the slot and for reamed cross holes for pins. This was machined from a 1 1/4″x 2 1/4″ x 2″ 316L Stainless steel billet.
Adaptor plate
Bolt hole circle to be drilled then counter bored as per their specification. CBORE was checked using custom plug gauge which in turn was checked using a micrometer.
PLANT MACHINEry Parts
The customer provided us the worn parts shown on the left. Our economical solution was to reverse engineer then produce new parts as shown right. We reused the old grease fittings and washers.
contact us for MACHINING SERVICEs
TEL: 07340208872 EMAIL: southernmachininguk@gmail.com